Electric baseboard heaters
The affordable Québec standard. Easy to add or replace, controlled room by room with its own thermostat for comfort exactly where you want it.
Electric heating installed, replaced or upgraded by RBQ-licensed electricians. Baseboards, radiant in-floor and smart thermostats, handled from load calculation to commissioning. One quote, one crew.
A complete electric heating job, handled end to end by one licensed crew. No subcontracted surprises, no loose ends.
We measure the space, confirm the heat you need, and run a load calculation to see whether your panel has the headroom or needs an upgrade.
Each heater gets a correctly sized dedicated circuit, typically 240V, run cleanly and wired to current Québec code.
We supply and install electric baseboards, convectors and wall heaters, sized and placed for even, room-by-room comfort.
We lay the heating cable or mat under the floor, tie it to its own dedicated circuit and wire a floor-sensor thermostat to control it.
We wire and configure your thermostats, programmable or smart, so every room holds the temperature you set.
We test each circuit and heater, confirm the thermostats respond, walk you through the controls and leave the space clean.
Electric heating is wiring before it's warmth. It's worth having a licensed crew run the circuits, size the panel and configure the thermostats so the system is safe, efficient and built to last.
A clear path from your first call to a heating system that just works. You always know the next step.
Tell us the rooms, the building and what you want heated. We give you a clear, itemized quote.
We visit, measure the heat you need and confirm whether your panel has the capacity or needs an upgrade.
We pull the permit when one is required and book a time that works for your home or business.
We run the dedicated circuits, mount the heaters or radiant flooring, and install the thermostats.
We test everything, set up your thermostats and show you how to run the system room by room.
Every space is different. We help you pick the heating that fits the room, the budget and the comfort you want.
The affordable Québec standard. Easy to add or replace, controlled room by room with its own thermostat for comfort exactly where you want it.
Even, silent warmth that comes up through the floor, with nothing on the walls. A favourite for bathrooms and renovations where you want comfort underfoot.
Convectors and wall heaters warm a room faster, and complete electric systems heat a whole home or business, all set room by room.
We install and upgrade electric heating across Greater Montréal, the West Island, Laval and the South Shore. Call +1 514-441-5544 to book.
Not seeing yours? Email info@oklaelectrique.ca. We reply within the business day.
Electric heating is the standard for Québec homes because the province's hydroelectricity is clean and affordable. You also control comfort room by room with individual thermostats, so you only heat the spaces you're using. Programmable and connected thermostats help you keep that under control.
Baseboards are the affordable, flexible choice and easy to add or replace in any room. Radiant in-floor heating gives even, silent warmth underfoot and is a favourite in bathrooms and renovations. We'll look at your space and tell you which makes sense, or where to mix both.
Yes. Electric heating is well suited to room-by-room additions. We run a dedicated circuit to the new heater, confirm your panel can carry it, and install a thermostat so that room holds its own temperature.
Smart and programmable thermostats both improve comfort and save energy by matching the heat to your schedule. We can recommend the right thermostat for each room and wire and configure it properly. We work with common Québec heater and thermostat brands.
Yes. Replacing aging or noisy baseboards is one of the most common jobs we do. We remove the old units, install new heaters on properly sized circuits and pair them with modern thermostats. Manufacturer warranties pass through on the equipment we install.
Adding electric heating draws on your panel, so we run a load calculation to confirm there's enough capacity or whether an upgrade is needed. When the work requires a permit, we pull it. Both steps keep the installation safe and to code.
